Composite Decking Trims 3600mm x 40mm x 42mm x 5mm

Composite Decking Trims 3600mm x 40mm x 42mm x 5mm

A deck looks unfinished until you’ve dealt with the edges. Exposed board ends around the perimeter don’t just look amateur, they expose the composite interior and can start deteriorating faster than the deck surface itself. This trim covers that — wraps around the edge, hides the exposed ends, and makes the whole installation look complete and intentional instead of like you’ve just laid boards on a substructure and called it done.

3600mm per trim, composite material so it coordinates with the decking, 40mm x 42mm x 5mm profile designed to cap off board edges cleanly.

What you’re actually getting

• Composite edge trim, 3600mm per length
• 40mm x 42mm x 5mm profile for neat edge coverage
• Hides exposed decking board ends
• Creates a clean transition at deck perimeter
• Composite material matches the decking
• Practical finishing accessory
• Works for new installations and refurbishment
• Residential and landscaping applications
• Makes the whole deck look designed instead of raw

Specs, straight up

Composite decking trim, 3600mm length, 40mm x 42mm x 5mm profile. Designed to cover exposed board edges and create a finished perimeter.

Where it gets used

Around the perimeter of any composite decking installation — gardens, patios, terraces, balconies, outdoor seating areas, anywhere the edges are exposed and need finishing. Residential decking projects, landscaping installations, anywhere you want the deck to look complete instead of like raw construction.

Measure and cut to required length using tools suitable for composite materials. Position along the exposed edge and align carefully with the decking boards. Secure using appropriate fixings for the decking system. Make sure it’s firmly supported and aligned throughout its length. Follow the manufacturer’s installation recommendations.

Why this product

A finished deck is only finished when the edges are finished. Exposed board ends look raw and amateur, and they expose the material to weathering that can cause deterioration faster than the top surface. Trim that coordinates with the decking instead of looking like an add-on makes the whole installation look intentional. At 3600mm per trim you’re covering a practical length of edge without too many joints. The composite material means it’s not wood that needs sealing, just part of the system that works.

Grab Composite Decking Trims 3600mm x 40mm x 42mm x 5mm from Smart Innovation and finish your deck properly.