Worktop Straight Joint

Long Description:

Worktops come in standard lengths, so a longer run often means joining two pieces together in a straight line rather than one continuous board. That joint needs something holding it from underneath, or it’ll gap slightly over time from the weight and daily use a worktop takes. This joint clamps the two pieces together, so the seam stays tight instead of working loose.

Features & Benefits

• Clamps two worktops together in a straight-line joint
• Keeps alignment accurate during and after fitting
• Suits extending a worktop run beyond a single length
• Works with laminate and wood worktops

Specifications
This is a straight joint fitting for connecting two worktops in line, designed to clamp them together and hold alignment at the seam. It suits laminate and wood worktops, residential or commercial.

Where It’s Used
Comes up wherever a worktop run is longer than a single board — kitchens, café counters, and office break rooms all use the same fitting when extending a run in a straight line.

Fitting
Fitted using standard worktop jointing router cuts, so both worktops need the groove routed in before joining. Worth checking both cut ends are square before joining, since the connector pulls them tight but won’t correct a badly cut edge. Comes through the same suppliers as the rest of our building materials range.

Get in touch if you’re not sure which joint depth matches your worktop thickness.